Clevcon [Thailand] Co., Ltd.
  • Home
  • About Us
  • Our Product
        • Water Proofing System
          • Roof and concrete slab waterproofing
          • Bathroom, pool, and water tank waterproofing
          • Underground waterproofing
        • Concrete Repair
          • Resin for crack injection
          • Cement grouting & Patching
          • Epoxy grouting & Anchoring
          • Bonding & adhesive
          • Crack repair & joint sealing
        • Waterstop Product
          • Swelling waterstop for construction joint
          • PVC waterstop for construction & expansion joint
        • Protective Coating
          • Water Repellent
          • Heat Reflective Paint
        • Industrial Flooring
          • Epoxy flooring
          • Polyurethane flooring
        • Concrete form Release & Curing Compound
          • Concrete form release agent
          • Concrete curing compound
  • Project Reference
  • Knowledge
  • News
  • Contact Us
  • ไทย
  • English
  • Menu Menu
Hyfloor 181LF
Self Smoothing Polyurethane Floor Screed
Data

HYFLOOR 181LF is a self-smoothing colored polyurethane concrete flooring system. It is
suitable for light duty applications. HYFLOOR 181LF can be applied as a single layer at 2-
3 mm. thickness. It provides durable, smooth, seamless, and attractive floor finish.

Technical information
Thickness Average Consumption Rate Coverage per set
1 mm. 1.90 kg/m2 9.50 m
2
2 mm. 3.80 kg/m2 4.70 m
2
Color

Size
PACKING 18 Kg / set
RATION 3 : 3 : 12 (A : B : C)
CONSUMPTION 1.8 Kg / m2 / mm
COVERAGE 5.0 – 6.7 m2 / set
Application

Porous concrete will require priming. Apply HYFLOOR EPOXY PRIMER by roller at a
dosage rate of 0.15 – 0.2 kg/m2
depending on substrate condition. Broadcast with
quartz 0.4 – 0.7 mm. onto wet primer.
Allow primer to dry. Then remove excess sand with vacuum cleaner.
Mixing
HYFLOOR 181LF is prepackaged with specific ratios. It is recommended to mix full
unit only.
Mix part A and part B together with a low speed electric stirrer for 30 second.
Ensure that mixed material blended well.
Add color pigment (part D) into the mixed and blend to uniform color appeared.
Gradually add part C to the mixed resin parts. During the operations, scrape down
the sides and bottom of the container with a flat or straight edge trowel at least
once to ensure complete mixing. Continue mixing for minimum 2 minutes to ensure
the final mix being totally homogenous.
Top coating
Apply the mixed HYFLOOR 181LF with a toothed trowel or pin screed to the correct
thickness, achieving a flat surface. The topping is then rolled with a spiked roller to
remove entrained and entrapped air.
Take care to spread newly placed materials across the transition of previously applied
mixes before the surface begins to set.
Allow for minimum 14 hours before open to light traffic.

TDS ENG MSDS ENG

สอบถามข้อมูลเพิ่มเติมติดต่อ

02- 569-1540, 099-165-1155, 099-492-4224
โทรตอนนี้

Clevcon Thailand Co., Ltd.

Clevcon (Thailand) Co., Ltd.
is the expert of chemical products for construction industry. We both manufacture and distribute a complete range of goods under the well known brand “Clevcon”.

Address

28/12 M.17, Bung Kham Proi, Lum Lukka, Pathum Thani, 12150
clevconthailand@gmail.com
(+66) 2-569-1540
(+66) 99-165-1155 (+66) 99-492-4224

Shop

Shopping Bag IconShopeeShopping Bag IconLazadaShopping Bag IconFacebookShopping Bag IconTiktok
© Copyright 2020 - Clevcon [Thailand] Co., Ltd.
Scroll to top