Rockkote 02

Water Based Silicone Water Repellent

Data

Suitable for natural stone, sandstone, exposed aggregate, washed sand finishes, terracotta tiles, exposed brick, polished concrete, building walls, and bare concrete structures.
Water-based formula, odorless, safe for users.
Protects against moisture, mold, and algae growth.
Matte finish that does not alter the original surface color, preserving its natural look.

Technical information

Properties	Results	Test Method
Appearance	Clear liquid	–
Density	1.01 ± 0.01	ASTM D1475
Initial Surface Absorption, 28 days	< 0.05 ml/(m2 /s	BS 1881 Part 208
Drying Time	1 Hour	–

Size

Packaging Size	Available in 20 Liters, 5 Liters, 1 Liter
Coverage Rate	0.15 – 0.2 Liters / m² / coat
Application Area	20 Liters covers approx. 50 m² (2 coats) 5 Liters covers approx. 12.5 m² (2 coats) 1 Liter covers approx. 2.5 m² (2 coats)

Application

Surface Preparation
• The surface to be coated must be completely dry and clean, free from dust, cement debris, grease stains, or any glossy coatings.
Others
Application Procedure
• The solution can be applied by spraying or using a brush or roller, repeating 1–2 times depending on the desired gloss level. Each coat should be left to dry for approximately 1 hour.
• After application, allow the surface to dry for 12 hours before use. (Full curing time is 24 hours.)
Post-Use Cleaning
• Tools should be cleaned and the product rinsed off with clean water immediately after use.
Recommendations
• Not suitable for surfaces that are constantly in contact with or submerged in water.
• If the material to be coated is moist, it must be allowed to dry before application.

TDS ENG MSDS ENG

สอบถามข้อมูลเพิ่มเติมติดต่อ

02- 569-1540, 099-165-1155, 099-492-4224

โทรตอนนี้

Rockkote 02

Water Based Silicone Water Repellent

สอบถามข้อมูลเพิ่มเติมติดต่อ

02- 569-1540, 099-165-1155, 099-492-4224

Clevcon Thailand Co., Ltd.

Address

Shop