Rockkote 01

Silane Siloxane Water Repellent lmpregnation

Data

Suitable for natural stone, sandstone, washed gravel, exposed aggregate, terracotta tiles, exposed brick, polished concrete surfaces, building walls, and bare concrete structures.
Fine particles penetrate deeply into the material.
Protects against moisture, mold, and algae growth.
Matte finish that does not alter the original surface color, preserving its natural appearance.
Can be painted over for use on house and building walls.

Technical information

CHARACTERISTICS	RESULTS	TEST METHOD
Appearance	Clear liquid	–
Density	0.80 ± 0.01	ASTM D1475
Initial Surface Absorption, 28 days	< 0.05 ml/(m2 /s)	BS 1881 Part 208
Drying Time	1 Hour	–

Size

Packaging Size	18 liters, 3.785 liters
Usage Rate	0.15 – 0.2 liters / m² / coat
Coverage Area	20-liter size covers 45 m² (2 coats) 5-liter size covers 9.46 m² (2 coats)

Application

Surface Preparation
• The surface to be applied must be completely dry, clean, free from dust, cement residues, grease, or varnish coatings.
• If the material to be applied is damp, wait until it is completely dry before application to achieve maximum performance.

Application Procedure
• For application, both spraying and brushing/rolling back and forth 1–2 times can be used. Allow each coat to dry for about 1–2 hours.
• After the final coat, leave to dry for 12 hours before use.

Cleaning After Use
• Tools and product residues should be cleaned immediately with thinner or solvent after use.
• Any remaining material should be tightly sealed before storage.

Recommendations
• Work in a well-ventilated area.
• Do not apply on days with high humidity or during rainfall.

For additional questions

02- 569-1540, 099-165-1155, 099-492-4224

CALL NOW

Rockkote 01

Silane Siloxane Water Repellent lmpregnation

For additional questions

02- 569-1540, 099-165-1155, 099-492-4224

Clevcon Thailand Co., Ltd.

Address

Shop