Surface Preparation
• The surface to be coated must be completely dry, clean, and free from dust, cement residues, grease, or any coatings
that may cause the product to peel off.

Application Procedure
• The product can be applied using a brush or roller, 1–2 coats depending on the desired gloss level.
Allow approximately 2 hours drying time between coats.
• After application, leave to dry for 12 hours before use.

Cleaning After Application
• Clean tools and remove product residues with thinner or solvent immediately after use.
• Reseal the container tightly before storage.

Recommendations
• Work in a well-ventilated area.
• Do not apply on days with high humidity or rain.
• Keep out of reach of children, away from heat and open flames.