Clevcon [Thailand] Co., Ltd.
  • Home
  • About Us
  • Our Product
        • Water Proofing System
          • Roof and concrete slab waterproofing
          • Bathroom, pool, and water tank waterproofing
          • Underground waterproofing
        • Concrete Repair
          • Resin for crack injection
          • Cement grouting & Patching
          • Epoxy grouting & Anchoring
          • Bonding & adhesive
          • Crack repair & joint sealing
        • Waterstop Product
          • Swelling waterstop for construction joint
          • PVC waterstop for construction & expansion joint
        • Protective Coating
          • Water Repellent
          • Surface Sealer & Clear Coating
          • Heat Reflective Paint
        • Industrial Flooring
          • Epoxy flooring
          • Polyurethane flooring
        • Concrete form Release & Curing Compound
          • Concrete form release agent
          • Concrete curing compound
  • Project Reference
  • Knowledge
  • News
  • Contact Us
  • ไทย
  • English
  • Menu Menu
Rockguard Nano
น้ำยาอะครีลิคทากันซึมเคลือบเงาใส สูตรน้ำ
Data
  • Semi-gloss film, suitable for coating polished cement, exposed concrete, and face brick surfaces.
  • Fine particles penetrate well into various surfaces.
  • Contains wax to enhance water-repellent properties.
  • Suitable for both interior and exterior use.
Technical information
Technical Information Test Standard Result
Physical Appearance Milky white liquid –
Specific Gravity (Density) 1.00 ± 0.05 ASTM D1475
pH 8.5–10.5 –
Drying Time 1–2 hours –
Size
Packaging Size 20 liters, 5 liters, 1 liter
Application Volume 0.15 – 0.2 liters / m² / coat
Coverage Area 20-liter size covers 50 m² (2 coats)
5-liter size covers 12.5 m² (2 coats)
1-liter size covers 2.5 m² (2 coats)
Application

Surface Preparation
• The surface to be coated must be completely dry and clean, free from dust, cement debris, grease stains, or glossy coatings
that may cause the coating to peel off.
Application Procedure
• The solution can be applied by spraying or using a brush or roller, repeating 1–2 times depending on
the desired gloss level. Each coat should be left to dry for approximately 1 hour.
• After application, allow the surface to dry for 12 hours before use. (Full curing time is 24 hours.)
Post-Use Cleaning
• Tools should be cleaned and the product rinsed off with clean water immediately after use.
Recommendations
• Not suitable for surfaces that are constantly in contact with or submerged in water.
• If the material to be coated is moist, it must be allowed to dry before application.

TDS ENG TDS ENG

For additional questions

02- 569-1540, 099-165-1155, 099-492-4224
CALL NOW

Clevcon Thailand Co., Ltd.

Clevcon (Thailand) Co., Ltd.
is the expert of chemical products for construction industry. We both manufacture and distribute a complete range of goods under the well known brand “Clevcon”.

Address

28/12 M.17, Bung Kham Proi, Lum Lukka, Pathum Thani, 12150
clevconthailand@gmail.com
(+66) 2-569-1540
(+66) 99-165-1155 (+66) 99-492-4224

Shop

Shopping Bag IconShopeeShopping Bag IconLazadaShopping Bag IconFacebookShopping Bag IconTiktok
© Copyright 2020 - Clevcon [Thailand] Co., Ltd.
Scroll to top