Rockguard

Water Based Acrylic Water Repellent

Data

Suitable for natural stone, sandstone, washed gravel, exposed aggregate, terracotta tiles, ceramic tiles, exposed brick, and polished concrete surfaces.
Enhances the gloss and shine of various surfaces.
Water-based formula, odorless, and safe for users.
Protects against moisture, mold, and algae growth.
Shields surfaces from stains, easy to clean, and keeps surfaces looking new.

Technical information

Properties	Results	Test Method
Appearance	Milky white liquid	–
Density	1.02 ± 0.02	ASTM D1475
Initial Surface Absorption, 28 days	0.17 ml/(m2 /s)	BS 1881 Part 208
Drying Time	1-2 hours	–

Size

Packaging Size	20 Liters
Coverage Rate	0.15 – 0.2 liters / sq.m. / coat
Application Area	20 liters covers approx. 50 sq.m. (2 coats)

Application

Surface Preparation
• The surface must be completely dry, clean, and free from dust, cement residues, grease, or any coating materials that may cause peeling.

Application Procedure
• The product can be applied by spraying, brushing, or rolling. Apply 1–2 coats depending on the desired gloss level, allowing approximately 2 hours of drying time between coats.
• After application, allow the surface to dry for 12 hours before use.

Cleaning After Use
• Clean tools and remove product residues with thinner or solvent immediately after use.
• Reseal the container tightly before storage.

Recommendations
• Work in well-ventilated areas.
• Avoid application on days with high humidity or rainfall.
• Keep out of reach of children, away from heat, and open flames.

TDS ENG MSDS ENG

For additional questions

02- 569-1540, 099-165-1155, 099-492-4224

CALL NOW

Rockguard

Water Based Acrylic Water Repellent

For additional questions

02- 569-1540, 099-165-1155, 099-492-4224

Clevcon Thailand Co., Ltd.

Address

Shop