![Clevcon [Thailand] Co., Ltd.](https://clevconthai.com/wp-content/uploads/2020/09/logo-clev-4.png){kind=logo}
EZ Release
Oil Based Concrete Form Release Agent
Data
- Used on molds to facilitate easy removal and achieve a smooth, beautiful concrete surface.
- Suitable for all types of concrete casting such as columns, floors, walls, beams, piles, cast-in-place concrete, and precast concrete.
- Spreads well on molds and can be applied by brushing or spraying.
- Extends the lifespan of the mold.
- Can be used outdoors.
- Protects steel molds from rust formation.
Technical information
| Property | Measured Value |
|---|---|
| Physical Appearance | Brown liquid |
| Specific Gravity at 25 °C | 0.85 ± 0.05 |
| Viscosity (DIN Flow Cup) | 10 – 20 seconds |
| Flash Point, °C | > 160 |
Size
| PACKING | 20 L / CAN. 200 l / drum |
|---|---|
| COVERAGE | 30 – 40 m2 / Liter |
Application
Surface Preparation
• Clean the mold surface thoroughly, removing any cement stains, rust, or dirt.
Application Procedure
• Apply using a brush, sponge, or spray.
• Apply a thin, even coat over the surface. Excessive thickness may cause air bubbles.
Approximate Usage Rate
• 35–50 sq.m. / liter for steel or plastic molds.
• 20–35 sq.m. / liter for wooden molds.
สอบถามข้อมูลเพิ่มเติมติดต่อ
02- 569-1540, 099-165-1155, 099-492-4224
Clevcon Thailand Co., Ltd.
Clevcon (Thailand) Co., Ltd.
is the expert of chemical products for construction industry. We both manufacture and distribute a complete range of goods under the well known brand “Clevcon”.
Address
28/12 M.17, Bung Kham Proi, Lum Lukka, Pathum Thani, 12150
clevconthailand@gmail.com
(+66) 2-569-1540
(+66) 99-165-1155
(+66) 99-492-4224
Shopee
Lazada
Facebook
Tiktok