EZ Plug

Rapid Setting Cement

Data

Ideal for stopping active water leaks with continuous flow.
Sets within 30–60 seconds.
Applicable in water tanks, swimming pools, tunnels, basements, elevator shafts, and other underground structures.
Non-shrinking with high strength.

Technical information

CHARACTERISTICS	RESULTS	TEST METHOD
Appearance	Grey powder	–
Mixed Density	1.9 ± 0.1	ASTM D1475
pH	11	–
Hardening Time	45 – 60 seconds	–

Size

PACKING	5 & 20 kg / pail
COVERAGE	Varies

Application

Surface Preparation
• Chip away the concrete surface at the leaking area to a width of at least 2 cm in a “V” shape. Clean the surface thoroughly, then dampen it with water until saturated before application.

Installation
• Mix EZ PLUG with clean water in small amounts, just enough for each application. Apply EZ PLUG into the leaking area by hand or with a trowel, pressing firmly for about 1 minute until the mixture sets, then release.
• Smooth out and remove any excess cement on the surface for a neat finish.

TDS ENG MSDS ENG

For additional questions

02- 569-1540, 099-165-1155, 099-492-4224

CALL NOW

EZ Plug

Rapid Setting Cement

For additional questions

02- 569-1540, 099-165-1155, 099-492-4224

Clevcon Thailand Co., Ltd.

Address

Shop