Surface Preparation
• Surface must be free from oil, dust, grease, standing water, loose cement debris, or foreign matter
Mixing
• Mix Repair-M with clean water at a ratio of 5 – 5.5 liters per 1 bag of mortar
• Use a low-speed drill to mix until homogeneous
• Do not add sand or any additional chemicals to the mixture
Installation
• Use a trowel to apply the repair material to the desired area with pressure during application to ensure full filling of the repaired section. In case of repairing edges or corners, to prevent the material from flowing or bulging to the other side, use two trowels to support both sides of the corner
• Leave to dry until damp and then finish as desired with a trowel
• Can be applied at a thickness of 1–35 millimeters
• Suitable working temperature should be between 5–35 degrees Celsius
Cleaning
• Clean tools immediately after use with clean water